How to Use a Gear Puller

Last Updated on

Dealing with car servicing and repairing is quite tiresome when you do not have the right tools for the job. It is especially true if the parts involved for re-assembling are tightly fixed example of the areas are gears and pulleys. In such cases, you need a device that can do the job with ease. This is no other than the gear puller! Some car dealers are not conversant with the specifications of the puller including its usage. Users fail to understand that effectiveness of the device depends on the right application.

To efficiently use a gear puller and get the desired results, you have to consider several factors; these majorly are related to space available for it to fit and have a firm grip of the bolt to be pulled. The jaws of the puller must be of the right size to fit and give you a firm grip. It means that space is right for it. Over-sized puller does not hold the parts firmly as required and this exposes the mechanic working on it.
There are several steps to follow whenever one is handling the gears; make sure that the gear puller is the right size and type, either 3-jaw puller or 2-jaw puller. It is essential to avoid damaging the bearings when working. A 2-jaw puller is useful when working on limited space while the other one is more effective when working in a more significant area.

Secondly, the positioning of the puller is paramount, as the jaws must make contact with the outer or inner side of the part to be pulled. Ensure that the middle bolt is in touch with the tip of the shaft then apply the tension gradually. The jaws should be parallel to the axis to avoid damaging the threads or the gear.

Some gears might be too tight to use the puller alone mostly in old cars, in such cases; a hammer comes in handy to help loosen the bearings or the gear. Correct use the gear puller gives you more extended service.


Gear Pullers User Guide

There are certain simple steps to follow to be able to properly work with a gear puller. Further, consumers can use the same steps with nominal adjustments to remove other aspects of shafts and holes, along with gears.

Find the Appropriate Gear Puller

The initial step in using a gear puller is choosing the proper tool to do the job. Particularly, the jaws of your gear puller should fit within the gear or other component someone desires to remove. Consumers can shift the diameter of the jaws while using cross arms. However, because gear pullers are available in various sizes, consumers should confirm the highest and lowest diameter to which they could adjust the gear puller right before purchasing. In addition, consumers should take a look at to guarantee the forcing screw also suits onto the gear or device. Consumers must also secure the perfect size socket wrench to change the nut by the end of the forcing screw.

Adjust the Gear Puller

When a consumer has chosen the perfect size gear puller, he/she should adjust the cross arms till the jaws fit correctly over the gear. Consumers should try to adjust the cross arms till the jaws are even and at near to right angles up against the gear. More, the forcing screw must sit in the front core of the gear, in contact with the shaft.

Tighten up the Forcing Screw and Take Away the Gear

The next thing is for consumers to tighten up the forcing screw. This involves using a socket wrench to tighten up the nut by the end of the screw till the screw is on the shaft. This step also means that the jaws are tight onto the gear. Consumers should carry on and turn the socket wrench gradually till the gear comes lose. The gear puller should continue gripping the gear at the center all through this method.

Basic safety and Precautions When You Use a Gear Puller

Besides using the proper tool to do the job, that is the initial step in using a gear puller, there are lots of additional safety as well as cautionary steps that customers should follow. 1st, consumers should think about oiling the forcing screw by using machine oil before utilizing a gear puller. It will help prevent needless sticking. Additionally, if a gear or device remains caught after several efforts at tightening up the forcing screw, consumers should change to a more substantial gear puller.

Consumers also needs to instantly stop getting a gear puller if any piece on the gear puller becomes misshaped, such as if the forcing screw mushrooms or splits. Consumers should always wear the appropriate security goggles or a face shield whenever using gear pullers.

Further, consumers must look into wearing safety clothing like coveralls or steel-toed boots to guard against flying parts. Ultimately, to make sure the longevity and ideal working of the gear puller, shoppers would be wise to use and keep gear puller within a dry place, far from extreme heat.


[ux_latest_products columns="6" title="Check Out More Products Review!" orderby="rand"]

Leave a Reply

Your email address will not be published. Required fields are marked *

×
%d bloggers like this: